Robbe Modellsport Monsun V3 ARF
Kompakti 3m T-peräsin liidokki laipoilla ja siivekkeillä.
Tekniset tiedot:
Kärkiväli: 3000mm
Pituus: 1480mm
Lentopaino: noin 2950g
Runko: hiilikuitu/lasikuitu
Siivet: Styroksi/lasikuitu/ Abachi viilupinta
The MONSUN V3 is the successor and further development of the widely used MONSUN V2. The ARF and PNP+ versions now have a reinforced fuselage with visible centre seam, painted in the mold.
In addition, the MONSUN V3 PNP+ now comes with a built-in Ro-Control LITE 85A controller, which supplies the six built-in FS-82 HV MG soft-start servos with a constant 8V BEC voltage.
It is a thermal and all-round glider in the compact 3m class with a 4-flap wing. The T-tail is linked without play by a directly built-in servo.
The flight characteristics can be described as very good-natured. The MONSUN V3 can be flown as a slow thermal glider or as an all-rounder at a slightly faster speed.
The ready-covered wings are constructed from a styrofoam core, fibreglass layers, abachi planking and a carbon fibre-reinforced spar.
The ratio of weight to strength has been optimised.
The MONSUN V3 is suitable for beginners as well as advanced model pilots.- two-part, ready Oracovered Styro/GfK/Abachi surface with CfK connection
- continuous sandwich spar (carbon-pine-carbon) for maximum bending stiffness
- built-in digital Robbe servos FS-277 with ball bearings and metal gearbox (PNP only)
- ready-made wiring of all servos with MPX 6-pin connectors between wing and fuselage (PNP only)
- ready ironed rudder flaps with mounted rudder horns
- painted GRP fuselage with built-in wooden formers and CfK reinforcements
- powerful Ro-Power Torque 3526 870 K/V outrunner, optimized for 4S (PNP only)
- large canopy for easy battery change and RC installation
- ready hinged rudder flaps
- prefabricated rudder linkages with linkage parts from German production
- pre-cut servo well and linkage covers
- anodized 38mm aluminum spinner with straight center section (PNP only)
- high-strength carbon fiber airscrew 12x8" (PNP only)
- modern, highly visible design
- Monsun V3 model largely prefabricated
- In mold painted fiberglass/carbon fuselage
- Ready-made covered Styro/GRP/Abachi wing
- Ready-made covered, removable T-tail made of balsa
- Small parts (rudder horns, linkages, clevises, ball heads, covers, etc.)
- Assembly instructions in German/English/French
Spannweite (mm): 3000 Fluggewicht ca. (g): 2950 Rec. engine: BL Outrunner Steuerung: H,S,Q,M,WK Hersteller: Robbe Modellsport Länge (mm): 1480 Rumpf: CFK/GFK Flächen: Styro/GFK/Abachi empf.Motor: Ro-Power Torque 3526-870kv Ausführung: PNP - PLUG N PLAY empf.Akku: 4S/4200mAh LiXX Profil: HQ 2,5/9 Flugerfahrung: Fortgeschritten Bauerfahrung: Anfänger Antriebsart: Elektro
