Topmodel Element 3.5M ARF
Element sähkömoottoriliidokki on suunniteltu termiikkilennätykseen.
Siivessä oleva hiilikuitu keskisalko ja etureina jäykistävät siiven.
Valkoinen lasikuituinen runko, kolmioainen siipi helpottaa varastointia ja kuljetusta. Siivet päällystetty Oracover päällysteellä.
Rakennusohjeen löydät tästä
Pinta-ala: 77,5 dm2
Element 3.5M ARF
Element is indispensable for thermal flying.
The wing spars and leading edge from carbon fibre gives the wing enough strength and stiffness.
Many expert pilots will be particularly surprised by its excellent flight qualities, given by the thin wing airfoil and low weight.
Thanks to the long fuselage, the model has a calm and steady glide path.There are several possibilities how to mix the functions of the flaps (high performance thermal soaring, spot landing etc.).
With the recommended drive set, the performances are fantastics as well as when climbing (power) as soaring (lightness) and the flying time is counted in hours rather than in minutes!
The floating elevator is balsa framework with carbon spar and leading edge. The elevator is mounted on a fiberglass bed. Rudder and elevator are controlled by servo in the fin. The drive unit is designed so that it is possible to use 3S lipo battery.
The model is designed and manufactured in Czech Republic. Spare parts are in stock.
If you are interested in a different color combination than we offer, please contact us.
RC equipment: 5 channel
7 channel receiver
4 micro servos for ailerons and flaps (Hitec HS 85MG)
2 micro servo for rudder and elevator (Savox SH-0257MG)
Motor: MEGA Acn 22/30/3E
Controller: 60-80A ( e.g. SPIN 66, XReg80 )
Spinner: "turbo" Ø 40mm - No.0201559
Propeller: 13/7" CAM FOLDING PROP Graupner/SJ
Accu: 3S LiPol 2,2-4Ah
- Lightweight gel-coated white fiberglass fuselage and canopy
- Three-piece wing is made in balsa framework with wing joiner, leading edges and wing spar made of carbon and covered with Oracover®
- Lightweight wings are made in a balsa framework and covered with Oracover®
- Removeable tail surfaces are made in a balsa framework and covered with Oracover®
- Vinyl cnc cut stickers
- Top quality accessories
- Complet assembly manual with step by step illustrations