Muuttaa 2S LiPo jännitteen sopivaksi tavalliselle 4,8V / 6,0V servolle
Servolle syötettävä jännite 5,5V
With the servo-voltage regulator of the mixing operation of 2S Lipo-compatible servos and receivers with "normal" 4.8 / 6 V servo is in an on-board voltage up to 8.4 V, is possible. Just plug the servo having a reduced voltage required to the SVR and this in turn down to the appropriate power output of your receiver SVR regulates the vehicle voltage at 5.5V. Tip:. the SVR also other "small" consumers at reduced voltage to the receiver can be connected (eg gyro stabilization system, ECU, lighting ...).
Arvosteluja ei vielä oleJaa mietteesi.
Anna arvostelu ensimmäisenä.
