Uusi Porvoontie 1434

01190 Box

Finland

Y-tunnus 1772904-1

©2019 by Sky dream hobby. Proudly created with Wix.com

PowerBox Professional sisältäen katkaisian (4330)

 

PowerBox Professional with sensor switch 4330

SKU: PB111
275,00 €Price
  • The PowerBox Professional is a modern power supply system which contains all the electronic components required for today's receivers, servos and models. Every component needed for a totally secure airborne power supply, including ICs, micro-controller and electronic circuits, is duplicated!

     

    This High-End power supply system features an outstanding range of the latest innovations, including a high-resolution graphic OLED screen, four match-channels catering for eight servos, and the facility to bind to the downlink channels of various manufacturers.

     

     

    Features :

     

    High-resolution graphic OLED screen with 128 x 64 pixels

    Ultra-simple menu-based programming system using the Sensor-Switch Signal amplification for a total of eight channels and twelve servos

    Synchronised servo output: all servos operate totally synchronously

    16-bit processor for high-speed, high-resolution signal processing

    Four match-channels, each for two servos; all servos separately variable

    Double regulated output voltage

    Sockets for Multiplex MSB and Spektrum downlink bus systems, update capability with USB Interface Adapter for other systems

    Direct transmission of both battery voltage values to the transmitter

    Voltage display for each battery separately

    Servo voltages can be set to 5.9 V or 7.4 V

    Minimum value memory displays any voltage collapses

    Combined heat-sinks permit high regulator power

    Voltage regulator monitor

    Supports four battery types: LiPo, LiFePo, NiMH, NiCd

    Suppression of any servo feedback currents which may occur

    Can also be switched on and off using the MagSensor Update-capable using the PowerBox USB Interface Adapter

     

     

    Specification :

     

    Operating voltage: 4,0V - 9,0V

    Power supply: 2 x 5s NiMH/NiCd, 2s LiPo, 2s LiFePo

    Current drain: approx. 130mA

    Idle current: approx. 15µA

    Output voltage: 5,9V or 7,4V stabilised

    Max. load current: Peak 2x20A

    Dropout voltage: 0,3V

    Receiver: 1 via parallel inputs

    Supported telemetry systems: DSM2/DSMX, M-Link

    Channels: 8, 4 of them programmable

    Servo outputs: 12, 8 of them programmable

    Servo signal resolution: 0,5µs

    Selectable signal frame rates: 9ms, 12ms, 15ms, 18ms, 21ms

    Integral screen: OLED graphic panel 128x64 pixels

    Dimensions: 110x72x24

    Weight incl. switch: 130g

    Temperature range: -30°C to +75°C

    EMV approval: EN 55014-1:2006

    CE: 2004/108/EG