The ROXXY BL Control speed controller is designed for drones and helicopters.
S-BEC can take care of the power needs of up to 6 servos when using 2-6S LiPo. The S-BEC circuit can supply 7A continuously and momentarily 10A current to the servos.
Versatile programming possibilities
Characteristics:
-LiPo or NiXX battery, low voltage detection
- Can be programmed "MULTIMate" on the device or via the controller.
- Brake on/off
- Motor rotation direction
- Start, soft/medium/hard
- Timing
- 8/16 khz
-Governor mode for helicopters
Multiplex ROXXY BL-Control 780 S-BEC
Width: 37mm
Height: 13mm
Length: 89mm
Weight: 93g
Continuous current: 80A
Clock frequency: 16 kHz
Number of cells: 2-6S LiPo, 5-18 NiMH
BEC voltage: 5.5V
BEC current: 7A
Telemetry: No
Brushless ESC for large models or performance drives
This ROXXY® BL Control controller is designed for surface and helicopter models and has a very powerful switching BEC. Through new switching regulator, it can be powered up to 6S Lipo cells as a driving battery. A separate receiver battery is not necessary.
7 amps of current, and short-term up to 10 amperes are the servos then available.
An Extensive programming options allow the controller to optimally adapt to the respective application.
Programming capabilities and telemetry:
• LiPo- and NiXX- battery undervoltage shutdown selectable
• Programming possible by means of transmitter (per stick position) or to the multiplex MULTImate
• brake switched on and off
• Motor direction reversal
• Motor startup behavior
• Timing
• selectable clock frequency 8 / 16kHz
• Governor Mode (speed control) for model helicopters
