Topmodel FOX MDM1 Deluxe version 4m ARF
Upea skaalamalli tunnetusta taitolento purjekoneesta.
Valmiiksi rakennettu, sis. laskutelineen, avattava kabiini...
Lisäksi tarvitset ( 2x HS-7985MG, 4x HS5625MG, 2x HS-82MG servoa)
Rakennusohjeen löydät tästä
Lentovideon löydät tästä
Siipi-kuormitus: 77,6-97 g/dm2
Profiili: HQ 2/12-2/10
MDM1 FOX 4M Deluxe ARF 1:35
FOX MDM 1 Deluxe version, 4m wingspan
Semi-scale 1:3,5 of the famous two-seater aerobatic sailplane MDM 1 FOX.
This is a pure aerobatic model which can also fly in relatively calm weather thanks to the wing airfoil used.
The FOX has a broad range of speed and a sufficient stability.
The wings are equipped with air-brakes but also with camber flaps. These flaps have a longer length compared to reality and are divided into 2 parts. Thus, it is possible to use these 2 parts, together, like gigantic ailerons but also as camber flaps. This makes possible to make the FOX even more general-purpose and powerful in aerobatic.
This model is practically finished with the legendary quality of TOPMODEL CZ kits.
SPAN : 4000MM
LENGTH : 2130MM
WEIGTH : 8-10 KG
Semi-scale model MDM 1 Fox is delivered in ARF version- covered with Oracover®.
The model is equipped with in-built airbrakes, landing gear and tail wheel. Accessories includes parts needed to completion of openable cab.
Fully built-up and matched model.
Ready fiberglass FUSELAGE with already installed sliding cabin, fiberglass seat, dashboard panel, connectors, wiring for aileron servos and airbrakes and wing joiner casing. Further rudder is fixed. Landing gear, tailwheel and tow hook already installed.
WINGS with metallic airbrakes and ailerons already installed. Wing fixing device already installed and servos connector also.
Stickers are sticked on model.
Fiberglass fuselage, white gelcoated equipped with fixed landing gear, tailwheel and tow hook installed including already installed sliding cabin, fiberglass seat, dashboard panel.
Cabin frame in 2 parts, molded in fiberglass. Transparent PVC canopy.
Finished wings: foam core abachi planked and covered with Oracover®. The wings are reinforced with fiberglass and carbon cloth under the wood plankage. Wing joiner: carbon rod wrapped into kevlar. Ailerons (already installed) and flaps surface hinged, finished. Schempp-Hirth mechanical metallic airbrakes installed with their cover.
Horizontal empennage and fin: molded fiberglass, finished.
High quality hardware (fiberglass control horns, metal clevises, push-rods, screws...).
Simple assembly drawing plan.