Hacker Bellanca Super Decathlon
Semi-Scale malli tunnetusta amerikkalaisesta taitolentokoneesta. Rakenne on kevyt, balsaa ja vaneria ja suunniteltu sähkömoottorille. Bellanca sopii hieman kokeneille ja kokeneille lennättäjille. Mukava sporttinen lennokki jossa siivekkeet ja laskulaipat, soveltuu myös purjelentokoneiden hinaukseen. Lennokissa NACA 2412 siipiprofiili joka yhdistettynä pieneen lentopainoon antaa ketterän koneen jossa hyvät lento ominaisuudet. Lennokki on kalvopäällysteinen.
Lisäksi tarvitset:
Vähintään 5 kanavaiset radiolaitteet, harjaton sähkömoottori, esim. MFORCE 5050EA-8 tai MFORCE 5060EA-8 ja Nopeudensäädin MC-80A, potkuri APC 13x8", spinneri 57mm, 6x standardiservoa (45-50g), servo jatkojohtoa 4kpl 150mm, 4kpl 300mm, (1x y-johto 150-200mm jos käytät laipoilla yhtä kanavaa). 5-6S 4000mAh LiPo akku.
Tekniset tiedot:
Lentopaino: alkaen 3950g
Kärkiväli: 2020mm
Pituus: 1350mm
Moottori: 1250-1500W
Hacker Bellanca Super Decathlon Electro 60 ARF RED
BELLANCA SUPER DECATHLON 60
Known semi scale aerobatic plane with balsa and ply construction designed for electromotor. The model is suitable for intermediate and advanced pilots. Bellanca is a recreational acrobatic model with ailerons and flaps and is also suitable for towing gliders.
The NACA 2412 wing profile and a lightweight design made of high-quality balsa and plywood with accessories made of plastic and fiberglass give the model excellent flight characteristics. Bellanca is coated with heat-shrink covering film.
Items needed to complete:
min. 5-channel RC set, brushless electromotor MFORCE 5050EA-8 No. HC3540 or MFORCE 5060EA-8 No. HC3540A with ESC MC-80A No. HC3382, propeller APC 13/8” No. HCLP13080E (size by battery and motor), spinner 57mm, 6pcs stadard servos 45-50g No. HC4348, Servo extension leads 4pcs 150mm No. HC4479, 4pcs 300mm No. HC4483, Y-cable 150-200mm for flaps (if you will controll the flaps with only one channel) No. HC4490, battery LiPo 5-6S from 4000mAh. Basic tools (drill machine, screw drivers, small pliers etc.), 5min epoxy glue, water-based wood glue, contact glue, hot glue (hot melt glue gun), colors, self adhesive tape etc.Items needed to complete:
min. 5-channel RC set, brushless electromotor MFORCE 5050EA-8 No. HC3540 or MFORCE 5060EA-8 No. HC3540A with ESC MC-80A No. HC3382, propeller APC 13/8” No. HCLP13080E (size by battery and motor), spinner 57mm, 6pcs stadard servos 45-50g No. HC4348, Servo extension leads 4pcs 150mm No. HC4479, 4pcs 300mm No. HC4483, Y-cable 150-200mm for flaps (if you will controll the flaps with only one channel) No. HC4490, battery LiPo 5-6S from 4000mAh. Basic tools (drill machine, screw drivers, small pliers etc.), 5min epoxy glue, water-based wood glue, contact glue, hot glue (hot melt glue gun), colors, self adhesive tape etc.
