BORA F5J PNP (plug and play) 2,54M
Mukana myös siipipussit.
Täyshiilikuituinen F5J liidokki jossa servot ja moottori+säädin valmiiksi asennettuna. Lisää vain oma vastaanotin ja 3S-850mAh LiPo akku.
BORA F5J PNP 2,54M
The BORA F5J PNP by Tomahawk Design is a purebred high-tech full-carbon model for the electric flight class F5J. It is extremely durable and light at the same time. This is mainly based on the elaborate carbon construction of selected materials. The fuselage is made in spread-tow carbon, which gives it tremendous rigidity at the lowest weight possible.
The two-piece carbon wing is made of biaxial carbon fabric on an Airex foam core and has an extremely high bending and torsional strength. The wing halves are connected by a carbon wing joiner and screwed to the fuselage. The flaps articulation is classic cross. The empty weight is only about 450g, the flying weight about 700-780g.
The BORA F5J PNP has an exceptionally high degree of prefabrication for this class and comes with built-in digital servos with metal gears, finished wiring and linkages. Also the wing plugs are soldered ready.
As drive we use a brushless outrunner 2826-2200kv and a 30A regulator, which is designed for 3S 850mAh LiPo batteries. The entire drive has a great weight / power ratio and is thus tuned very efficiently.
Building up the model consists only of the soldering of the sockets to the battery, the installation of the receiver, balance the center of gravity and transmitter programming!
• speed control
• elevator (1x)
• rudder (1x)
• ailerons (2x)
• flaps (2x)
2x KST-113 MG, 4x SX DHV built-in
Ray 30A built-in
3S LiPo 850mAh
32mm Aluminium Spinner
- Full-carbon competition model of class F5J 400 in PNP
- Model comes assembled with electronics and linkages mounted (except battery and receiver)
- Fuselage in Spread-Tow Carbon
- Wing in biaxial carbon on Airex core
- Drive, servos and linkages completely installed
- The set includes wing and rudder protection bags